Wheel Center Caps for Toyota Sienna

Toyota Sienna Wheel Center Caps

If you Toyota Sienna Minivan needs wheel center caps, there are lots of options to choose from. Read on to discover what you need to know before choosing these components for your vehicle.

Center caps help to keep much of the rain and dirt on the roads surface from splattering up into the wheels. This protects the hub nut and the wheel bearings. Some of the Toyota Sienna center caps are large enough to cover the lug nuts, which can help to keep them clean and secure.

Center caps also add to the appeal of the vehicle. Having all the parts present on the minivan and in good repair gives it a well-kept look.

There are two general styles that Toyota uses on the Sienna. One of them has two different finishes. Which one you need for your minivan depends largely on its year of manufacture.

If your Toyota Sienna was manufactured from 1998 through 2003, it uses a large center cap. It is about 6.8 inches in diameter and covers the lug nuts on the rims. The cap is round, silver, and has the Toyota emblem stamped in the center.

Toyota moved to a much smaller cap for Siennas made after 2003. They are 2.5 inches in diameter and dont cover the lug nuts. There are two styles of cap that are very similar. One is round and silver. It has a raised chrome emblem in the center. This style is available on model years from 2004 through 2010.

A variation that is available on models from 2004 through 2017 differs from the other small cap mainly in its finish. It is chrome with a raised chrome emblem in the center.

This task is usually fairly easy. You should be able to remove the center caps without taking off the wheels. The larger cap has a notch that you can use to carefully pry it off. Either a screwdriver or a special removal tool can be used to pry off the small or large caps. If youre removing a cap that you want to use again, you might want to put tape over the tool so it wont scratch the finish.

When you are ready to replace the cap, it just snaps in from the front. You may need to give it a couple of sharp raps with your hand to make the clips on the back click into place.