尾灯适用于梅赛德斯-奔驰 C230

Mercedes-Benz C230 Taillights

Make sure that other drivers give your car the space it needs while driving with these replacement taillights for your Mercedes-Benz C-Class. These taillights serve the critical function of indicating your position on the road. Sift through the options to select taillights to make your C230 shine.

The third brake light on your Mercedes-Benz C230 clearly displays your location on the road even if your taillights are obscured. Ensuring the correct operation of this part is important, and replacing the third brake light on your sedan is a simple task that should take less than an hour.

• Open the trunk, and remove the grommet pins and grommets holding the trunk lining in place.
• Use an Allen wrench to remove the lining screws and remove the plastic lining from the trunk of your C230.
• Pull the carpet away from the trunk until the third brake light assembly is exposed.
• Push back the sliding tabs, unhook the electrical harness, and gently remove the third brake light assembly.
• Remove the backing paper, and insert the new brake light assembly into the cavity. Install the screws, grommets, and grommet pins, and reconnect the wiring harness to complete installation.

LED lighting is great for the Mercedes-Benz C-Class. LED light bulbs, called diodes, produce a lot of illumination. LED lights also use up a very small amount of energy, and each diode is rated to last 50,000 hours. For perspective, that’s more than five and a half years of continuous use.

To take advantage of the many benefits imparted by LED taillights, you’ll need to remove the old taillight assembly from your Mercedes-Benz C-Class vehicle. Removing your old taillights and installing LED ones is easy and should take less than half an hour for each light.

• Turn off your Mercedes-Benz C-Class engine, and open the trunk.
• Remove the trim panel around the edge of the trunk by pulling out the plastic rivets.
• Pull back the trunk lining to expose the taillight assembly. Pick a side, and remove the bolts holding the assembly in place.
• Disengage the wiring harness, and push gently to remove the assembly.
• Position the new taillight assembly into place, insert the bolts, and reconnect the wiring harness to complete installation.

Instead of emitting the standard red glare, smoked taillights make your Mercedes-Benz stand out. Smoked taillights evoke a stealthy aesthetic with a layer of tint over the lens. While smoked taillights appear darker on the road, they still emit the same amount of light.