克莱斯勒 PT 巡洋舰发动机盖

Engine Valve Covers for Chrysler PT Cruiser

If you want to keep oil from leaking from your PT Cruiser engine-area, you will need an effective valve cover. Over time you may need to replace this part to prevent irreparable damage and to keep your Chrysler PT Cruiser in top working condition. With a selection of replacement engine valve covers for Chrysler PT Cruiser, you can find the replacement that you need for you specific model.

The valve gasket is made of either rubber or cork. It is attached to the valve cover. Once these parts are screwed on, they prevent oil from leaking. It is imperative that the oil stays in your cars engine. If the gasket is damaged, it is of little use. Valve covers and gaskets work hand in hand. One cannot work without the other. So, if you smell oil, see leaking around the valve cover, or see debris around the cover, the valve cover gasket should be replaced.

1. Disconnect hoses and vacuum hoses from valve cover. Make sure you take a picture of the hosing so you will have a reference of where they are to be reconnected.
2. Remove valve cover bolts with ratchet. All cars are different, so you should find a ratchet that fits the Chrysler PT Cruiser model.
3. Lift valve cover. When the cover is lifted, the gasket can be removed. It will be filled with grime and grease, so clean the interior with a small wire brush, soap and water.
4. Place valve cover back on top. Gently re-position the cover so that the gaskets can sit in the grooves. Tighten the bolts.
5. Reattach vacuum hoses. Put the hoses back into the correct openings. Refer to the picture taken to ensure correctness.

If engine oil leaks into your vehicle, the effects can be serious. The circulation of fluids in your Chrysler PT Cruiser engine allows for a safe and smooth operation. However, if the oil leaks out, then that will allow the motor to dry up and cause a lot of damage. The damage is often irreparable, and you will likely have to invest in a new vehicle or engine. If your Chrysler only has a faulty cover or gasket, it can be repaired with the right replacement parts.